Your cart
Your cart is empty
Uniview
8-Port Cloud-Managed PoE+ Switch
Model: NSW3000-8T2GT-POE-IN
In stock
Pre-order — ships when inventory arrives. Contact us for the current lead time.
Apply for dealer pricing For approved dealers. Pricing and terms vary by product and quantity.
Overview
The UNV NSW3000-8T2GT-POE-IN provides eight PoE+ camera ports and two Gigabit uplinks in a fanless chassis. It is a practical network hub for a compact IP camera system.
- 8 × 10/100Mbps PoE ports
- 2 Gigabit RJ45 uplinks
- 120W shared PoE budget
- Cloud, web and supported app management
Power distribution
Each PoE port supplies up to 30W, within the total 120W budget. Include the cameras’ maximum night-mode consumption when allocating power.
Long cable runs
Extended transmission can reach approximately 250m at a reduced rate of up to 10Mbps. That mode trades bandwidth for distance, so check each camera’s configured bitrate.
Specifications
| Model | NSW3000-8T2GT-POE-IN |
|---|---|
| Product Type | Cloud-Managed Ethernet PoE Switch |
| PoE Ports | 8 × 10/100Mbps PoE RJ45 Ports |
| Uplink Ports | 2 × 10/100/1000Mbps Gigabit RJ45 Ports |
| Network Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3az, IEEE 802.3x, IEEE 802.3af and IEEE 802.3at |
| Switching Capacity | 5.6Gbps |
| Forwarding Performance | 4.17Mpps |
| Packet Buffer | 2 Mbit |
| MAC Address Table | 4K |
| PoE Standard | IEEE 802.3af / IEEE 802.3at |
| Maximum PoE Budget | 120W Total |
| Maximum PoE Per Port | Up to 30W |
| PoE Mode | Mode A: Pins 1, 2, 3 and 6; Mode B: Pins 4, 5, 7 and 8 |
| Priority Ports | Ports 1–2 |
| Extended Transmission | Up to approximately 250 meters at a reduced rate of up to 10Mbps |
| VLAN | Access and trunk modes; up to 32 VLANs with IDs from 1–4094 |
| Network Features | Link aggregation, loop detection, port isolation, port mirroring, rate limiting, flow statistics and broadcast storm control |
| Management | Supported Uniview Software, Cloud Management, Mobile Application and Web Interface |
| Power Supply | AC 100–240V, 50/60Hz |
| Maximum Power Consumption | 130W |
| Cooling | Fanless |
| Dimensions | 169 × 132 × 40mm |
| Weight | Approximately 0.67kg |
| Operating Temperature | 0°C to 45°C / 32°F to 113°F |
| Operating Humidity | 5% to 90% RH, Non-Condensing |
| Compliance | NDAA Compliant |
Compatibility
Supports IEEE 802.3af/at devices. High-power cameras that exceed a port’s rating require a different power source.
Need help matching this product to your project? Ask NSI
Specifications
Compatibility & accessories
Downloads & support
Find model-specific documentation and available software in Uniview’s Download Center.
- Choosing a selection results in a full page refresh.
- Opens in a new window.